FIRST
LINE PC PROTECTION
This tutorial
was written by the poster, and HAS
been placed in a couple of other forums, just in case you think that
you are seeing things 
An Attempt to put into one
place a small tutorial, that will [hopefully]
be used as a first port of call
for all those people who are having 'difficulties' with their PC's
How do I get rid of pop-ups / adware /
spyware?
There is a plethora of software
tools out there, waiting for you to
take them home, I will just stay with the ones that I have used myself,
as I believe that if I can use it, then it really IS idiot proof. I
have included tools that are freeware as well as those that require you
to buy them to get the full options.
I have concentrated on the
adware, spyware problem, and as such I
haven’t mentioned Anti-Virus, or Firewalls, as I think that each PC
SHOULD have those as a MINIMUM defence, I’m just adding my little bit
to the extra defences required in today’s PC environment.
Where an OS is mentioned, I am
basing it on Windows, as I run W2K Pro. XP will be very similar.
To combat this problem you
should have the following in your armoury at least:
Google tool
bar:http://toolbar.google.com/
The reason for this selection is that I think that this item should be
on everyone’s PC, it gives you a rapid access to information on
whatever it is that you suspect of not playing fair, and it has a
pop-up blocker built in. Google themselves keep information from you
for their own use, but you do have the option to disable this as you
install. Also there are a few extra items that the toolbar runs that
are not strictly required, they can all be disabled in the options tab
on the toolbar itself.
AdAware SE: http://www.lavasoft.de This is the one that everyone
SHOULD know about.
SpyBot S+D: http://www.safer-networking.org/en/download/index.html
Get its immunization mode
running in the background, stopping the bad stuff from even getting in.
Swatit: http://swatit.org/ Bots and Trojan cleaner. It is said
to be slow, but it is effective.
CWShredder: http://www.intermute.com/products/cwshredder.html
This is a very quick worker,
and very easy to use.
Crap Cleaner http://www.ccleaner.com/
I'm adding this, as there are a
lot of supposedly temp files that
can be cleared away safely, that are scattered all over the drive, and
this one tool will remove damn nigh all of them in one hit.
Just leave the default
settings, and run it.
Spyware
Blaster http://www.javacoolsoftware.com/spywareblaster.html
This is software that will stop
the bad guys from even getting onto
your PC in the first place. Again, it's a free download, and it's a
load and forget device, even has auto-update enabled for us really
forgetful types.
Prevx http://www.prevx.com/
Another piece of software that
detects when the registry is being
changed, and will alert you to it, to let you decide whether to allow /
disallow.
One tip. suspend Prevx
protection when you are loading software, as it will question
EVERYTHING that you are doing
15 day free trial. But it works
so well I PAID for it ......
HiJackThis: http://www.merijn.org/downloads.html
This will give you a list of
everything that has loaded up, and is
running on your system. It will allow you to delete them, but be
warned, this is a very dangerous tool if used without care. Check
online for instructions on use.
Itty Bitty
Process Manager: It is
also found at Merijn.org, to see why this has been included:
| Quote: |
| Small update: I've been seeing more and more cases of infections by trojans that kill any antivirus or antispyware programs you try to use and remove them. For such cases, I created a standalone version of the 'Itty Bitty Process Manager' inside HiJackThis. It should be a bit harder for trojans to detect, since it has no window caption. If they do start targeting it by filename, rename the executable before running it and you should be good to go. |
Registry Cleaners:
I use Registry Mechanic, and I’ve recently discovered Macecraft, and
their RegSupreme. Both work well, but I find that RegSupreme to be the
easiest of these to use.
Registry Mechanic: http://www.winguides.com/
Macecraft: http://www.macecraft.com/
And finally, I would advise everyone to keep their system updated with
the latest patches, as and when they are available.
For Windows: http://v4.windowsupdate.microsoft.com/en/default.asp
This is for Win2K and is V4, if you are running XP, then it will be
V6 as the latest, and it will download the latest software to allow you
to use this version before you can get any updates.
To help keep these neat and tidy, I open a new file in Program Files,
called 'Security'.
Download each tool there. Then install each tool, making sure that the
destination folder is set to the Security folder.
On your desktop, in the tool bar at the bottom [default position] of
the screen,
right click, and click on toolbars, then on 'quick launch'.
Right click inside the quick launch area, [if none seen, right
click toolbar, click on 'unlock toolbar'.] select open folder, inside
there, right click and select 'new folder', label it 'Security'.
Close it down, you will now have a Security folder icon in the quick
launch section.
Go to the Security file, open each application, and right click on the
.exe that would open it.
Select 'send to desktop'. You now have all the shortcuts on your
desktop.
Click on the Security folder in quick launch, reduce the size of
the window so that you can see the short cuts, drag and drop each one
into the folder. Close folder. You now have your security tools ready
to use at a moments notice ....................
Now to run our new toys:
First rule: Only run one application at a time……… Conflicts will happen
if two applications are trying to clean the same fault.
You need to update each tool, prior to using it, to ensure that you
are using the latest version. Remember to open, update then CLOSE each
application, before you update the next one.
If you are running XP, then shut off the system restore
[Right-click My Computer, select properties, then System Restore tab,
then tick/check the Turn off System Restore.]
This is an application that keeps a back up of settings of your system,
and if you are infected, it is possible that the restore option would
'restore' the baddies. That is the reason I say switch it off first.
However, if you are a complete novice at this, then it is in your
own interest to keep the restore option working, then if you do the
worst................ you CAN get out of jail free.
System Restore :
start > all programmes > accessories > system tools >
system restore.
If you are going to use the restore option, you might as well set
yourself a known good restore point, at least it will be back to where
you began.
Check the 'create a restore point' click next ........then enter
the description for the point ....... start point would do, then click
create. You now have a point to return to IF it goes wrong.
Ideally you should be in Safe Mode to run these tools, as this is a
mode that only starts the bare minimum of applications to get you
running, and [hopefully] none of the problem programmes will start.
Safe Mode is accessed on start up, by tapping on the F8 button
[some systems use F2 / F10] repeatedly, until a screen opens with a
menu of safe options.
AdAware, SpyBot, Swatit and CWShredder can be run, and whatever they
find is fairly safe to remove straight away.
HiJackThis and the stand alone Itty Bitty Program Manager are a little
different, in that they will generate a comprehensive list of running
processes on your system, then it is up to you to decide what should be
there, and what should not. BE WARNED, once deleted, it’s GONE. And you
can do a lot of damage to your system if you do it wrong.
The registry cleaners are another special case, these will generate
a list of [to them] registry keys that can be removed. BE WARNED, do
not mess with the registry at all, if you are not sure, then DON’T DO
IT. Run the cleaner, then examine each entry on the list carefully.
As a quick and dirty method, I delete all those identified as obsolete,
or non-existent, and I tend to take my time with the others. REMEMBER :
if in doubt : DON'T. It is better to leave a suspect setting in the
system, rather than remove it and find that nothing works anymore.
To finish, I like to do the windows update now. Get all the
critical ones first, then do any stand alone ones [these are the ones
that have do be done singularly] Finally get any optional ones for the
system, drivers etc.
I like to follow this with Defrag [Right click My Computer, select
Explore, Right click on C drive, click on tools] I also do scandisk as
well, [now called error checking] same place as defrag, set it to do
its work automatically, click OK, the PC will then say it cannot do it
now, would you like to start scandisk the next time you start windows.
Click yes.
You should now be the proud owner of a cleaner, leaner, faster PC.
PS [If you are running XP, and you DID disable the system restore. Now
would be a good time to start it again.]
You should also be aware that there are nowadays, programmes that can
and will defeat your tools.
Either by hiding from them, or by switching them off. This tutorial
is not addressed at those, it is merely an introduction into keeping
your PC as YOUR PC.
I'll add tools as and when I've used them, ONLY if they pass the
criteria of me being able to use them EASILY AND they do what they say
they will do.
One final word :
If the software is FREE, but
you could afford to pay something, then DO SO.
The more people that do pay towards the cost of these tools, then the
more these people will develop their tools.
Original Tutorial
by DaFoxx
for TheTAZZone-TAZForum
Originally posted on December 26th, 2005 here
Do not use, republish, in whole or in part, without the consent of
the Author. TheTAZZone policy is that Authors retain the rights to the
work they submit and/or post...we do not sell, publish, transmit, or
have the right to give permission for such...TheTAZZone merely retains
the right to use, retain, and publish submitted work within it's
Network.